612-869-3213 service@midlandhtg.com

Your Neighborhood

Heating & Cooling Company


Fair, Flat Rate, Upfront Pricing…

Midland Heating and Air Conditioning uses flat rate pricing. What they means to you, the homeowner, is that after we diagnose your problem, in most cases, we can tell “on the spot” what it will cost to perform your repair. Flat rate pricing includes parts, labor, and our Fixed Right or it is FREE Guarantee.   Our service vehicles are fully stocked with the parts needed to repair your furnace, air conditioner, boiler, and most other home comfort products. PLUS, you will have a trained, professional, and HONEST technician performing your repair.

Our technicians are trained to quickly diagnose your problem, perform the repair, and get you back to normal just as quickly as they can.  With 66 years of experience there are few service issues that we have not seen.

Midland offers multiple payment options for your repair…..cash, check, debit card, VISA, MasterCard, & Discover.  Our service guarantee is simple…..We guarantee that the repairs we make to your furnace, boiler or air conditioner will fix it right.  If your appliance fails during the current season, WE WILL REPAIR IT AGAIN ABSOLUTELY FREE!

Technicians You Can Trust…

At Midland Heating and Air Conditioning our technicians are constantly trained by the leading educators in the HVAC industry.  In addition, for work done in Minneapolis and St. Paul, our techs have had to pass rigorous testing and received licensing. Lastly, everyone who works for Midland Heating & Air Conditioning has to pass an extensive background check.

Visual…tech with homeowner smiling

Our services include / We repair all brands:

  • Furnace replacement
  • Boiler replacement
  • Air conditioner replacement
  • Ductwork / Vents
  • Furnace tune-ups
  • Boiler tune-ups
  • Air conditioner tune-ups
  • Certification safety inspection of your furnace or boiler
  • Furnace repair all brands
  • Air conditioning repair all brands
  • Indoor Air Quality evaluations
  • Gravity furnace replacement
  • Radiant Heating specialists
  • Humidifier repair and installation
  • Thermostat and controls installation
  • Ventilation
  • Furnace maintenance agreements
  • Boiler maintenance agreements
  • A/C maintenance agreements
  • Heating repair / Cooling repair
  • In-floor and baseboard radiant heating
  • Ductless mini-split air conditioning
  • Code compliance repairs
  • Light commercial service /rooftop installation
  • Rooftop furnace repair
  • Rooftop air conditioning repair
  • Furnace Repair or Service
  • Boiler Repair or Service
  • Air conditioner Repair or Service

Licensed, bonded and insured

Midland Heating and Air Conditioning is happy to service many brands of heating and cooling equipment. From gas forced air furnaces and boilers (water or steam) to all types of air conditioning. Our Service Techs are Certified, are Competancy Card licensed in the cities of Minneapolis and St. Paul, insured, background checked before hiring and trained by leading educators in the HVAC industry.

We provide emergency furnace, boiler, and air conditioning repairs in Minneapolis / St. Paul area

Emergency Service call 612-869-3213

We use a “flat rate” style pricing system to assure you fair and upfront pricing.

Our service pricing is simple to understand and very fair. With Flat Rate Pricing you are in control. One price includes:

  • All labor
  • All parts
  • Fix Right or it is Free Guarantee

Office Location:

413 West 60th Street, Minneapolis 55419

Our regular service hours:

7:30 am to 5:00 pm, Monday through Friday.

Emergency Service 7 days per week 8AM to 10PM

Furnace Certification, Boiler Certification, AC Certification

Most cities in the Metro area require home owners to have their furnace or boiler certified that they are operating at safe and efficient levels before you can sell your home. Rental property owners are required to have regular safety checks done and recorded with the city, the property is located in. Only a licensed technician can perform this task correctly and sign the form that is required for Certification. If you have multiple pieces of equipment we offer a reduced rate for additional equipment on site. Call us today to schedule your certification 612-869-3213

Furnace tune-up, boiler tune-up, air conditioner tune-up

Every manufacturer recommends that a furnace, boiler, or air conditioner be properly cleaned and checked every year. Surveys conducted by a leading alternative energy company have shown that most heating and cooling systems do not perform to manufacturers’ specifications. Of the systems tested, 90% were found to have efficiency problems, 60% had inadequate airflow, and more than 80% were operating in adverse conditions resulting in excessive energy consumption and early mechanical failures.

At Midland Heating and Air Conditioning we do the common elements any good tune-up contractor would do such as gas valve tuning with a manometer, burner adjustments, heat anticipator adjustments, testing of components such as limit switches, roll out switches, ignition components, amp draw readings from the main blower and inducer motor fans, and fan speed adjustments. But then we dig deeper to really bring your furnace, boiler, or air conditioner back to factory fresh standards and get them running at peak efficiency.

For a small additional charge our techs will remove the blower out of the furnace and clean the fan blades. When a blower motor becomes packed with dirt, dust and debris, the effects can be very costly. A thin layer of dust or dirt on the fan blades can reduce air flow to your house by as much as 30%. In some cases the blower motors amp draw will run higher due to dirt build up which creates excessive heat and possible motor burn out. A new blower motor installed will set you back anywhere from $500 – $1100 depending on the make and model of the furnace. Another benefit of removing the blower motor is to allow our Techs to thoroughly inspect your heat exchanger. From the blower compartment looking up gives the greatest line of sight viewing of the heat exchanger.

The result of a cleaned furnace is very often a much quieter, efficient and near to new looking appliance. The furnace will be transformed from a ticking maintenance time bomb into a quiet, efficient and clean appliance that will keep you comfortable all season long.

Call us today to schedule your appointment:  612-869-3213

Evaporator Coil Cleaning (Indoor coil)

On average a dirty evaporator coil (indoor coil on top of furnace) will cause an air conditioner to run 20-30% less efficient than a clean evaporator coil. This can translate into serious money savings on your energy bill and much better air flow during cooling and heating season. Another thing to consider before you hire a contractor to do this job is only EPA Certified Technicians can legally be anywhere near your evaporator coil, which is at the heart of your HVAC system. Very few companies will suggest this option as part of your tune up, because of the time it takes to get access to the coil.

Midland Heating and Air Conditioning has EPA Certified Technicians that will perform a very thorough evaporator coil cleaning. We vacuum the interior and exterior coil surfaces to dislodge any particulate build up that can restrict air flow through the coil fins. The condensate drain pan and drain line are cleaned to ensure that no obstructions are left behind. If any fins are found bent, the fins will be straitened with a coil fin comb. For an extra charge we can also apply a bio-degradable pressurized evaporator foam cleaner to wash all the way through the coil to deep clean and kill microbial and fungal growth.

Call us today to schedule your tune-up:  612-869-3213

Condensing Coil Cleaning (Outdoor Coil)

Midland Heating and Air Conditioning has EPA Certified Technicians that will perform a very thorough condensing coil (the outdoor unit of your air conditioning system) cleaning by washing the interior and exterior coil surfaces to dislodge any particulate build up that can restrict air flow through the coil fins. Restrictions in airflow will drastically affect your air conditioners efficiency and can lead to mechanical failures too. Our Techs also perform a “superheat” or Sub-cooling Refrigerant Charge Calculation (which unfortunately gets skipped by low price tune up contractors), to ensure that your air conditioner is charged correctly. A correct freon charge ensures that your air conditioner is running at peak performance and efficiency.

Call us today to schedule your tune-up:  612-869-3213

Furnace Replacement / Boiler Replacement / Air Conditioning Replacement

Heating and cooling can account for more than 60% of your home’s energy costs

When a furnace, boiler, or air conditioner is not sized or installed correctly, this percentage can be even higher. Improper installation can also increase the short-cycling of the equipment, which can compromise comfort and increase wear and tear.

Midland Heating and Air Conditioning understands there is a big difference between new construction and replacement HVAC work. New construction HVAC work is where most heating contractors make their living; and most are very good at it. New construction is more like production work however. It’s what I would call “behind the scenes work.” The work gets done but no one pays much attention to it until it’s finished.

Replacement HVAC work is totally different. From the moment Midland employees arrive at your home to final clean-up we know we are working where you live. We must be very careful to protect your home and furnishings. What we do before we’re finished is just as important as the finished product. We are residential HVAC specialists and have set up our process and procedures just for the challenges of replacement work. We are in and out generally the same day. We are clean, neat and efficient. Our philosophy is to MEET OR EXCEED OUR CUSTOMER’S EXPECTATIONS.

How to choose a Furnace / Boiler / Air Conditioner

Heating or cooling equipment is not a stand alone appliance like a refrigerator or washing machine, which can be operated and tested in a laboratory setting. You cannot simply plug heating and cooling equipment into an electrical outlet and record how they operate. Heating and cooling equipment is part of a system, and it is that system, right or wrong, which will determine how well the heating or cooling equipment will run and also how long it will last.

Famous name brands are meaningless if the installer does not have the experience particular to the system they are installing. The manufacturers can advertise all they want, but their products function depends on the installer, not the name brand. Granted, some brands of equipment are manufactured better than others, but the best manufactured equipment with the worst installation is not better than the worst equipment with the best installation. Heating and cooling equipment needs proper ducting, piping, and venting to work properly, it cannot work well on its own.

Consumer Guides cannot accurately compare heating and cooling equipment because each installation must also be compared, and this is impossible. The AFUE or efficiency may be compared, the height and weight and costs may be compared, but how well the equipment works is completely dependent on the installation.

How Large of a Furnace / Boiler / Air Conditioner do you need?

When it comes to heating and cooling equipment size matters – a furnace, boiler, or air conditioner that’s too small won’t keep the house comfortable during extreme heat/cold. To avoid that possibility, most installed heating and cooling equipment is too large for the home they’re installed in. Cost is only one of the problems with an oversized unit. Compared with correctly sized equipment, a furnace, boiler, or air conditioner that’s too large will cycle on and off more frequently. That puts more wear on its’ components, wastes energy, and may cause the temperature to vary uncomfortably. To be sure of correct sizing, choose a contractor who takes the time to calculate heating/cooling needs for the house using an industry-standard calculation, such as found in the Air Conditioning Contractors of America’s Manual J. Such calculations take into account the climate, along with the house’s size, design, and construction.


Choosing a furnace should not the homeowners only concern, it is the contractors concern. Choosing a contractor is the homeowners job. Choose an honest reputable contractor who’s experience has taught them which furnaces to use and which ones to avoid.

Call us today for a free in home estimate:  612-869-3213





Minneapolis, Richfield, Edina, Bloomington, Burnsville, St. Paul, Eden Prairie, Minnetonka, St. Louis Park, Highland Park, South Minneapolis, Fulton, Lynnhurst, Kenny, Windom, Bryn Mawr, Tangletown, Linden Hills, Cedar-Isles-Dean, Lakeville, Hopkins, Eagan, Mendota Heights, Mendota, King Field, Armatage, East Harriet, East Isles, Lyndale